AIPMA Library


		ALL INDIA PLASTICS MANUFACTURERS' ASSOCIATION

AIPMA Library : A Modern and up-to-date Readers' Interactive
Library for the Plastic Industry:

The library is made in such a way that information can be sourced from books as well as electronic system. Separate section has been devoted for both systems. There are at present 400 to 500 books available on plastic processing, plastic raw material, engineering technology and related topics along with journal and standards.

A special section in the library is allocated for small group of say 10-15 persons who can conduct workshop and seminar using projection system, computers and internet, video conferencing and they can even participate in seminars and conferences being held outside Mumbai or India with specific arrangements with AIPMA. A special provision has been made for Data bank for the benefit of the industry.

This Library helps to give such up-to-date information to the plastics industry.

LIST OF BOOKS AVAILABLE IN AIPMA LIBRARY

LIST OF ISI STANDARDS

LIST OF ASTM STANDARDS

LIST OF PLASTIC JOURNALS

LIST OF BOOKS AVAILABLE IN AIPMA LIBRARY

No.	Title	Author
1	Modern Plastics Encyclopedia 1949 - 1993 and 2000	-
2	Plastics Engineering Handbook	Berins, M.L.
3	How to manage plastics waste	Bisio, A.L.
4	Injection molding of plastic components	Bown, J.
5	Guidebook to mixing & compounding	Cheremisinoff.
6	Plastic film technology	Finlayson, K.
7	Mixed plastics recycling technology	Hegberg, B.A.
8	Chemical aspects of plastics recycling	Hoyle, W.
9	Injection molding machines	Johannaber, F.
10	Decorating plastics	Margolis, J.M.
11	Additives for plastics handbook	Murphy, J.
12	CAD of plasticating screws	Rao, N.S.
13	Design formulas for plastics	Rao, N.S.
14	Polymer recycling	Scheirs, J.
15	Film extrusion manual	Vargas, Ed.
16	Encyclopedia of polymer science and engineering Vol. 1 - 17	Mark, H.F.
17	Engineered materials handbook	-
18	Prediction of polymer properties	Bicerano, J.
19	Polymer toughening	Arends, C.B.
20	PVC technology	athalye, A.S.
21	Practical thermoforming	Florian, J.
22	Polymer science	Gowariker
23	Degradable polymers recycling	Albertsson
24	Plastics products design handbook	Miller, Ed.
25	Encyclopedia of PVC V. 1-4	Nass, L.I.
26	Handbook of thermoplastics	Olabisi, O.
27	Plastics failure guide	Ezrin, M.
28	Polypropylene	Karger, K.J.
29	Concise encyclopedia of polymer science and engineering	Kroschwitz
30	International encyclopedia of composites	Lee, S.M.
31	Metallized plastics	Mittal, K.L.
32	Rheology for polymer melt processing	Piau, J.M.
33	Polymer extrusion	Rauwendaal
34	Injection and compression molding	Isaye, A.I.
35	Injection molding alternatives	Avery, J.
36	Total quality process control	Gordan, M.J.
37	Chemical reactions in plastics processing	Kircher, K.
38	Plastic part design for injection molding	Malloy, R.A.
39	Polypropylene handbook	Moore, Ed.
40	Rebirth of polypropylene	Moore, Ed.
41	Integrated use of plastics in cars	-
42	Limits of plastics uses in vehicle	-
43	Water soluble resins	Flick, E.W.
44	Polymer science	Sivaram, S.
45	Fundamentals of plastics	Richardson
46	Encyclopedia of basic materials	Simonds, H.R.
47	Polymer alloys	Klempner, D.
48	Stereo rubbers	Saltman, W.M
49	Polyurethanes	Phillips, L.N.
50	Rheology of elastomers	Mason, P.
51	Atomic radiation & polymers	Charlesby, A.
52	Polymerization & polycondensation process	-
53	Processing of thermoplastic materials	Bernhardt, E
54	Industrial synthetic resins handbook	Flick, E.W.
55	Physical properties of polymers	Bueche, F.
56	Synthese synthetic resins	-
57	Mechanical principles of polymer melt	Pearson, J.R.
	Weatherability of plastic materials	Musa, R.K.
59	Cellulose acetate plastics	-
60	Plastics in packaging	-
61	Polypropylene fibres & textiles	-
62	Polyurethanes	-
63	Polypropylene	Kresser, T.O.J
64	Plastics moulding plant	Groves, W.R.
65	First century of plastics	Kaufman, M.
66	Plastics technology	Milby, R.V.
67	Polystyrene	Teach, W.C.
68	Plastics progress 1957	Morgan, P.
69	Man made fibres	Moncrieff, R.
70	Glossary of urethane industry terms	-
71	Experimental plastics	Redfarn, C.A.
72	Polyester resins	Lawrence, J.R.
73	Polyamide resins	Floyd, D.E.
74	Neoprenes	Murray, R.M.
75	Epoxy resins	Skeist, I.
76	Extrusion of plastics	Fisher, E.G.
77	Plastic sheet forming	Butzko, R.L.
78	Fundamentals of vacuum technology	Pipko, A.
79	Organic coatings	Blom, A.V.
80	Vacuum deposition of thin films	Holland, L.
81	Plastic Product design	Beck, R.D.
82	Die casting	Doehler, H.H.
83	Plastics mold engineering	DuBois, J.H.
84	Plastics mold engineering handbook	-
85	Technology of CAD	Kumar, S.
86	Robotics	Popov, E.P.
87	Use of plastics materials in buildings	-
88	Adhesives	Herman, B.S.
89	Adhesives guide	Hurd, J.
90	Adhesives guidebook & directory	-
91	Manufacture & use of adhesives	Dhingra, K.C.
92	Adhesive bonding of reinforced plastics	Perry, H.A.
93	Gum plastics	Thompson, M.S.
94	Adhesive bonding of metals	Epstein, G.
95	Protective coatings for metals	Gailer, J.W.
96	Science of surface coatings	Chatfield, H.W.
97	Adhesive materials	Katz, I.
98	Textbook of polymer chemistry	Billmeyer, F.W.
99	Mechanochemistry of polymers	Moseley, R.J.
100	Metallic coating of plastics	Goldie, W.
101	Silicone technology	Bruins, P.F.
102	Silicones	Fordham, S.
103	Fluorinated hydrocarbons	Sittig, M.
104	Manual of man-made fibres	Carroll, C.Z.
105	Role of peroxides in curing polyester resins	Cywinski, J.W.
106	Welding of plastics	Neumann, J.A.
107	Story of chemical industry in Basle	-
108	Synthetic leather from petroleum	Sittig, M.
109	Progress in macrocyclic chemistry	Izatt, R.M.
110	Unit process in organic synthesis	Groggins, P.H.
111	Organic chemistry of macromolecules	Ravve, A.
112	Industrial plasticizers	Mellan, I.
113	Plastics additives handbook	Gachter, R.
114	Plastics extrusion technology	Hensen, F.
115	Blow molding handbook	Rosato, D.V.
116	Plastics compounding	Todd, D.B.
117	Polymer alloys & blends	Utracki, L.A.
118	Guide to doing business in SAARC countries	-
119	Directory of Dubai & U.A.E.	-
120	Top importers directory : South-East-Asian countries	-
121	Plastic materials for packaging	Barnetson, A.
122	Wiley encyclopedia of packaging	Brody, A.L.
123	Packaging foods with plastics	Jenkins, W.A.
124	Plastic films	Osborn, K.R.
125	Polypropylene in packaging	-
126	Food contact polymeric materials	Sidwell, J.A.
127	PVC '99 : from strength to strength	-
128	Universities Handbook	-
129	Rotational Molding	Beall, G.L.
130	Plastics for Engineers	Domininghaus, H.
131	Injection Molds	Gastrow
132	Polymer processing fundamentals	Osswald, T.A.
133	Understanding product design for injection Molding	Rees, S.
134	Understanding plastics packaging technology	Selke, S.
135	International plastics flammability handbook	Troitzsch
136	Feeding technology for plastic processing	Wilson, D.H.
137	Twin Screw Extrusion Twin Screw Extrusion	White, J.L.
138	Projektplanung	Aggteleky, B.
139	Colouring of Plastics	Mukhtar, A.
140	Plastics of Japan	-
141	Handbook of Plastic Compounds, Elastomers and Resins	Ash, M.
142	Composites Tooling and Component Processing	Brain, N.G.
143	Polymers for Wire and Cable	Cousins, K.
144	Thermoplastic and Thermoplastic Composites In the Automotive Industry. 1997 - 2000	Drake, N.
145	Functional Additives for the Plastics Industry	Dufton, P.
146	Colouring Technology for Plastics	Harris, R.M.
147	3 - D Textile Reinforcements in Composite	Matls. Miravete, A.
148	Biomedical Polymers	Shalaby, S.W.
149	Handbook of Plastics Testing Technology	Shah, V.
150	Metallic Pigments in Polymers	Wheeler, I.
151	Handbook of Fillers	Wypych, G.
152	Catalysts and Surfactants in Polyurethane Foams	-
153	Carbon Fibres	Donnet, J.
154	n - Nylons : Their synthesis, structure & prop.	Aharoni, S.M.
155	Metal Filled Polymers	Bhattacharya, S.K.
156	Recent Developments in Epoxy Resins	Hamerton, I.

LIST OF ISI STANDARDS

Sr. No.	ISI	TITLE
1	867	Methods of test for phenolic moulding materials
2	1300	Phenolic moulding materials
3	1461	Specification for plastic buttons
4	1998	Methods of test for thermosetting synthetic resin bonded laminated sheets.
5	2036	Phenolic laminated sheets
6	2076	Specification for unsupported flexible PVC sheeting
7	2221	Methods of test for amino plastic moulding materials
8	2249	Specification for adhesives (liquid) for leather beltings
9	2257	Paper adhesives, liquid gum and office paste type
10	2267	Polystyrene moulding and extrusion materials
11	2543	Cellulose secondary acetate materials for moulding and extrusion
12	2560	Specification for rubber based adhesives for tubes, non - curing
13	2561	Specification for rubber based adhesives for the automobile industry
14	2562	Specification for rubber based adhesives for tyres and tubes, curing
15	2508	Specification for low density polyethylene films
16	2530	Methods of test for polyethylene moulding materials & PE compounds
17	2798	Methods of test for plastics containers
18	2828	Glossary of terms used in the plastics industry
19	2886	Labelling paste for paper labels
20	3371	Specification for di - n - butyl phthalate
21	3389	Urea formaldehyde moulding materials
22	3395	LDPE and LLDPE materials for moulding and extrusion
23	3434	Glossary of terms for adhesives and pressure sensitive adhesive tapes
24	3447	Shellac jointing compound
25	3669	Melamine formaldehyde moulding materials
26	3687	Specification for pressure sensitive adhesive cloth tapes
27	3693	Specification for plastic spectacle frames
28	3988	Specification for guar gum
29	3730	Specification for high density polyethylene bucket
30	4669	Methods of test for PVC resins
31	4663	Specification for permanent rubber based adhesives for footwear industry
32	4761	Specification for unsupported PVC rain wear
33	5210	High impact polystyrene sheet
34	5322	Specification for high density polyethylene wash bowls
35	5378	Polyethylene cane
36	6307	Specification for rigid PVC sheets
37	6627	Specification for dimethyl phthalate plasticizer
38	6367	Specification for dextrin for adhesive industry
39	6746	Unsaturated polyester resin systems
40	7019	Glossary of terms in plastics and flexible packaging, excluding paper
41	7166	Specification for cellulose secondary acetate flakes
42	7188	Methods of test for cellulose acetate flakes
43	7328	HDPE materials for moulding and extrusion
44	7393	Specification for adhesive, bitumen emulsion
45	7395	Gum ghatti
46	7437	Methods of sampling and test for vegetable adhesives
47	7551	Method of test for compatibility of plastic containers
48	7803	Specification for plastic containers for pharmaceutical use
	Pt. I	Other than parenteral & ophthalmic preparations
	Pt. II	Parenteral & ophthalmic preparations
49	7888	Methods of test for flexible polyurethane foam
50	7933	Specification for flexible polyurethane foam for domestic mattresses
51	8255	Specification for flexible load bearing polyurethane foam components for vehicles
52	8543	Methods of testing plastics
	Pt. I/ S.I	Characterization of polymer structure and size
	Pt. II/S.II	Testing of materials before moulding
	Pt. III/S.I	Preparation of test specimens : compression moulded
	Pt. III/S.II	--------------------do--------------- : injection moulded
53	8543
	Pt. 4/S. I	Short term mechanical properties
	Pt. 8/S. I	Tests for specific products : buttons
54	8688	Specification for plastics potable water bottles
55	8747	Methods of test for environmental stress crack resistance of blow moulded PE containers
56	9220	Specification for tableware made of melamine plastics
57	9572	Specification for benzyl butyl phthalate plasticizer
58	9591	Plasticizer esters : methods of sampling & tests
59	9754	Specification for HDPE containers for packing of liquid pesticides
60	9766	Flexible PVC compounds
61	9827	Specification for shoe adhesive, natural rubber latex base
62	9833	List of pigments and colourants for use in plastics in contact with foodstuffs, pharmaceuticals and drinking water
63	9843	Code of practice for use of adhesives for packaging
64	9845	Method of analysis for determination of specific and / or overall migration of constituents of plastic materials & articles intended to come into contact with foodstuffs
65	9849	Guide for selection of toys for different age groups of children
66	9873	Safety requirements for toys
	Pt. I	Mechanical & physical properties
	Pt. II	Toxicological requirements
	Pt. III	Flammability requirements
67	9907	Specification for HDPE crates for 500ml glass milk bottles
68	10141	Positive list of constituents of polyethylene in contact with foodstuffs, pharmaceuticals and drinking water
69	10142	Specification for styrene polymers for its safe use in contact with foodstuffs, pharmaceuticals & drinking water
70	10146	Specification for polyethylene for its safe use in contact with foodstuffs, pharmaceuticals & drinking water
71	10148	Positive list of constituents of PVC and its copolymers in contact with foodstuffs, pharmaceuticals and drinking water
72	10149	Positive list of constituents of styrene polymers in contact with foodstuffs, pharmaceuticals & drinking water
73	10151	Specification for PVC and its copolymers in contact with foodstuffs, pharmaceuticals and drinking water
74	10171	Guide on suitability of plastics for food packaging
75	10815	Code of practice for the application of adhesives in footwear industry
76	10840	Blow moulded HDPE containers for packing of vanaspati
77	10889	Specification for high density polethylene films
78	10909	Positive list of constituents of PP and its copolymers in contact with foodstuffs, pharmaceuticals and drinking water
79	10910	Specification for PP and its copolymers for its safe use in contact with foodstuffs, pharmaceuticals and drinking water
80	10951	Specification for PP and PP copolymer - thermoplastics
81	11022	Methods of sampling and test for glues
82	11273	Woven roving fabrics of "E" glass fibre
83	11320	Specification for glass fibre rovings for the reinforcement of polyester and of epoxide resin systems
84	11352	Flexible packaging materials for the packaging of vanaspati in 100g, 200g, 500g, 1kg, 2kg, 5kg packs
85	11434	Specification for ionomer resins for its safe use in contact with foodstuffs, pharmaceuticals and drinking water
86	11435	Positive list of constituents of ionomer resins for its safe use in contact with foodstuffs, pharmaceuticals and drinking water
87	11551	Glass fibre chopped strand mat for the reinforcement of epoxy, phenolic and polyester resin systems
88	11584	Specification for HDPE crates for milk satchets
89	11704	Specification for ethylene acrylic acid copolymers for their safe use in contact with foodstuffs, pharmaceuticals and drinking water
90	11705	Positive list of constituents of ethylene acrylic acid copolymers for their safe use in cont. with foodstuffs, pharmaceuticals and drinking water
91	11805	Polyethylene pouches for packaging liquid milk
92	11988	Specification for hot seal patches
93	12229	Positive list of constituents of polyalkylene terephthalates (PET & PBT) for their safe use in contact with foodstuffs, pharmaceuticals and drinking water
94	12247	Specification for nylon - 6 polymer for its safe use in contact with foodstuffs,pharmaceuticals and drinking water
95	12248	Positive list of constituents of nylon - 6 polymer for its safe use in contact with foodstuffs, pharmaceuticals and drinking water
96	12252	Specification for polyalkylene terephthalates (PET & PBT) for their safe use in contact with foodstuffs, pharmaceuticals and drinking water
97	12724	Flexible packaging materials for packing of refined edible oils
98	12830	Rubber based adhesives for fixing PVC tiles to cement
99	12883	Polyvinyl chloride bottles for edible oils
100	12887	PET bottles for packaging of edible oils
101	12994	Epoxy adhesives, room temperature curing, general purpose
102	13055	Methods of sampling and test for anaerobic adhesives and sealants
103	13193	Polyalkylene terephthalate (PET & PBT) for moulding and extrusion
104	13199	Adhesives - guidelines for surface preparation for adhesive bonding
105	13254	Animal glue for match industry
106	13255	Adhesive - liquid - for use on high speed flap gumming and embossed envelope machines
107	13262	Pressure sensitive adhesive tapes with plastic base
108	13289	Polypropylene / impact copolymer (PPCP) crates for milk satchets
109	13360	Plastics - methods of testing
	Pt. I	Introduction
	Pt. II	Sampling and preparation of test specimens
	Sec. 1	Compression moulding test specimens of thermoplastic materials
	Sec. 2	Compression moulded test specimens of thermoplastic materials
	Sec. 4	Preparation of test specimens by machining
	Sec. 7	Preparation of test specimens with a specified reversion amorphous thermoplastics : plates
	Pt. III	Physical and dimensional properties
	Sec. 1	Determination of density & relative density of non - cellular plastics
	Sec. 4	Determination of bulk factor of moulding materials
	Pt. IV	Rheological properties
	Sec. 1	Determination of melt - mass flow rate (MFR) and the melt volume flow rate (MVR) of thermoplastics
	Pt. V	Mechanical properties
	Sec. 2	Determination of tensile properties - test conditions for moulding and extrusion plastics
	Sec. 4	Determination of izod impact strength
	Sec. 5	Determination of charpy impact strength
	Sec. 7	Determination of flexural properties
	Sec. 8	Determination of compressive properties
	Sec. 11	Determination of indentation hardness of plastics by means of durometer
	Sec. 12	Determination of ball indentation hardness
	Sec. 13	Determination of rockwell hardness
	Sec. 23	Determination of tear resistance of plastics film And sheeting
	Pt. VI	Thermal properties
	Sec. 1	Determination of vicat softening temperature Of thermoplastic materials
	Sec. 6	Determination of flammability by oxygen index
	Sec. 10	Determination of melting behavior (Melting temperature / melting range) of semi - crystalline polymers
	Pt. VII	Electrical properties
	Sec. 1	Measurement of resistivity of conductive plastics
110	13410	Glass reinforced polyester sheet moulding compounds
111	13411	Glass reinforced polyester dough moulding compounds
112	13449	Positive list of constituents of EVA copolymers in contact with foodstuffs, pharmaceuticals and drinking water
113	13463	Polyamide (nylon 6) materials for moulding & extrusion
114	13464	Polyamide (nylon 66) materials for moulding, extrusion
115	13576	EMAA copolymers and terpolymers for their safe use in contact with foodstuffs, pharmaceuticals & drinking water
116	13577	Positive list of constituents of EMAA copolymers and terpolymers in contact with foodstuffs, pharmaceuticals & drinking water
117	13601	EVA copolymers for their safe use in contact with foodstuffs, pharmaceuticals & drinking water
118	13653	Anaerobic jointing compounds for use in liquefied petroleum gas appliances and installations
119	13959	Polypropylene sutli
120	13960	Thermoplastic strappings
121	14129	Flexible packaging materials for the packing of vanaspati in 10kg and 15kg packs
122	14182	Solvent cement for use with unplasticized PVC plastic pipe and fittings
123	14425	Guide for manufacture of glass reinforced polyester resin mouldings
124	14426	Chlorinated paraffins
125	4984	HDPE pipes for water supply
126	4985	Specification for unplasticized PVC pipes for potable water supplies

LIST OF ASTM STANDARDS

Sr. No.	ASTM	TITLE
1	Vol. 08.01	Annual book of ASTM standards 1998 Plastics (I) : D 256 - D 2343
2	Vol. 08.02	Annual book of ASTM standards 1998 Plastics (II) : D 2383 - D 4322
3	Vol. 08.03	Annual book of ASTM standards 1998 Plastics (III) : D 4329 - Latest
4	Vol. 08.04	Annual book of ASTM standards 1999 Plastic pipe & building products

LIST OF PLASTIC JOURNALS

1.	ASIAN PLASTICS NEWS Emap Business Communications Asia 250, Tanjong Pagar Road #06-01 Singapore - 088541 Tel : 65 228 3790 Fax : 65 225 0123 Email : anniec@emap.com.sg
2	IEEMA Journal 501, Kakad Chambers 132, Dr. A. Besant Road Worli Mumbai - 400018 Tel : 4930532 Fax : 4932705 Email : mumbai@ieema.org
3	IPI JOURNAL Shri Bhagubhai Mafatlal Polytechnic Irla, Vile Parle (West) Mumbai - 400056 Tel : 6161775 Fax : 6105770 Email : ipi@bom3.vsnl.net.in
4	MACPLAS 20090 Assago, Milano Tel : 02 82283736 Fax : 02 57512490 Email : macplas@macplas.it
5	MEDICAL PLASTICS Classic Computer Services B-4, Mandir Apts., Opp. P & T Colony Jodhpur Char Rasta Ahmedabad - 15 Tel : 79 6740611 Fax : 79 6586300 Email : mpds00@vsnl.com
6	MODERN PLASTICS INTERNATIONAL H-83, Parshwanath Tower, Subhash Chowk Gurukul Road Ahmedabad - 380052 Gujarat Tel : 79 7493769 Fax : 79 7421956
7	PACKAGING TECHNOLOGY 8947/229-A, Kannamwar Nagar Vikhroli (East) Mumbai - 400083 Tel : 5432817 Email : ankur@bom3.vsnl.net.in
8	PLASTIC INDUSTRY 40-DLF Industrial Area Kirti Nagar New Delhi - 110015 Tel : 5939906
9	POPULAR PLASTICS & PACKAGING 126-A, Dhuruwadi, A.V. Nagwekar Prabhadevi, Dadar Mumbai Tel : 4309610 Fax : 4300601 Email : colorpub@vsnl.com
10	PLASTICS & RUBBER ASIA The Stables, Willow Lane Paddock Wood Kent TN12 6PF United Kingdom Tel : 44 1892 839200 Fax : 44 1892 839210 Email : pra@skc.co.uk
11	PLASTICS & RUBBER WEEKLY 19th Floor, Leon House, 233 High Street Croydon, Surrey CRO 9XT Fax : 020 8277 5531
12	PLASTIC WOVEN SACK NEWS 213, Richmond Towers 12, Richmond Road Bangalore - 560025 Tel : 080 2234603
13	RECYCLING INTERNATIONAL P.O. Box 2098 6802, CB Arnhem The Netherlands Tel : 31 26 3120 994 Fax : 31 26 3120 630 Email : recycling.int@worldonline.nl
14	RUBBER INDIA Navjivan Society 3/8, Lamington Road Mumbai - 400008 Tel : 3062174 Fax : 3073701 Email : rubber.airia@gems.vsnl.net.in

60^th Annual Report | Advertise | Contact us | Faq | Disclaimer

Powered by MICROPRO INFOTECH
This site is best viewed in IE 4.0 and above, 800*600 resolution.